Full Tutorial for Installing a New Shower Unit

Full Tutorial for Installing a New Shower Unit

Blog Article

Call Today

What are your thoughts about How to Install a Shower Enclosure ?

An effective shower setup needs cautious planning and a great deal of work. Most of the times, you will require to do three types of tasks: mounting walls, mounting the plumbing, as well as finishing walls.

Preparation

Firstly, you have to choose the sort of shower that you wish to set up. It is important to ascertain whether the picked shower is capable of handling particular systems and also can control a secure degree of water via the boiler. The majority of shower units nowadays are created to be flexible to various water stress (such as saved hot water as well as cool mains).
It is additionally essential to take into account the water stress and the planning of the piping and also drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The hose and spray parts of the push-on mixer shower device can be attached to the bathroom tap as per your requirement, and the water temperature can be adjusted through the faucets. Push-on mixers are cheap as well as incredibly basic to install. Nevertheless, although the pipe link is basic, it is conveniently removed. Additionally, it is bothersome to change the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this type of shower are integrated with a bathroom mixer tap, as well as the temperature can be changed with the bathroom taps. It is a really economical choice and no added plumbing is involved. However, the bath/shower mixers also struggle with troublesome temperature level control alternatives.

Manual Mixer: The hose pipe and spray of a hand-operated mixer shower system are a part of the wall surface device as well as the cold and hot water products are connected to a solitary shutoff The temperature and stress of the water are regulated with either one or a selection of handles (in much more costly showers). Although temperature level control is a lot easier in hand-operated mixer kinds, they are extra expensive than the previously pointed out mixers. They additionally need extra plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The hose pipe as well as spray of this shower kind belong of the wall surface device and the hot and cold water materials are linked to a single valve right here as well. It is total with an integrated stabiliser to self-adjust the water temperature level and also to prevent it from coming to be as well hot. One of the biggest benefits of a thermostatic mixer shower type includes practical temperature control. Nevertheless, it is the most pricey of the different mixer options.

Power Shower: A power shower is a solitary device containing an effective electric pump that is capable of altering both the water stress and temperature. This type of shower can be fitted if there is water from a cold water cistern as well as a hot water cylinder. A power shower makes the modification of both stress as well as temperature level very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a mix central heating boiler under keys stress.

Electric Shower: An electric shower is plumbed into a keys cold water supply and it warms the water electrically. It is important to keep in mind that for this shower kind to be mounted, the keys pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature level and stress to be readjusted by means of a knob. Versions with temperature level stabilisers are much better as they stay untouched by other taps somewhere else being used within the family. A major downside of electrical showers is that the control knob just enables the choice of heats at less pressure, or lower temperature levels at a higher stress. This is troublesome in the winter when the spray is often weak and the mains water is cooler. Nevertheless, this issue is tackled in some models which are readily available with a winter/summer setup.

Approach

Depending upon the kind of shower you wish to install, the shower head must either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it has to have a check shutoff.
Before starting, it is advisable to mark the settings of the shower head and control, as well as to plan the pipe-work included. Furthermore, the drainage system to eliminate the drainage will need to be prepared. Both placements of the cable television path as well as the shower switch will certainly additionally require to be considered if an instant or electric shower system is being installed.
Use the instruction guide supplied with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is essential to remove the water system. In order to shield the pipelines, they need to be provided a water-proof covering as well as additionally fitted with separating valves. The pipes can after that be hidden right into the wall as well as glued over to neaten the total look.
Fit the base tray, shower head, and installations.
Connect the primary shower control to the pipes that will be providing the water (This may call for a female screw string adapter).
Reconnect the water supply and test the pipelines for any kind of leakages, as some might require tightening up.
If you are mounting an electrical shower, remember to turn off the electricity supply prior to making any kind of electrical links. As soon as these connections have been made (there must be advice within the user's manual), the power supply can be switched back on.

Readjusting Water Pressure to Match Your Shower

The cold water storage tank can be lifted to a better height (occasionally just 150mm (6inches)) by installation a strong wooden support below it - possibly composed of struts as well as blockboards. If you pick this option, the primary and circulation pipes will certainly likewise have to be increased to meet the new elevation of the storage tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it must be connected right into the power supply in order to run.

Piping as well as Drainage

It is best to utilize 15mm diameter supply pipelines, and also make the go to the shower as brief and also straight as feasible so regarding maintain maximum pressure as well as minimise warm loss. Additionally, by minimising using elbows for pipe edges, you can decrease the resistance in the flow of the water. You can achieve this by bending the pipelines instead.

The Majority Of Typical Blunders

Violating or disregarding local code restrictions.

Using pipelines that are too little.

Affixing copper to galvanized without utilizing a brass or dielectric fitting in between the two.

Not making use of tape or pipeline substance at threaded joints.

Uneven your components when mounting them.

Not mounting an air void filling for components.

Reducing supply stub outs also brief to set up the shutoff valves onto after the completed wall is in place.

Not correctly lining up tubing right into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will certainly create a leak.).

When turning the water back on in your house, always run the outside tube valve or purge your toilets to bleed dirt and air from the lines. This debris can cause issues in your sink taps and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed our post about How to Install a Freestand. Thank you so much for finding the time to read through our piece. Sharing is good. Helping others is fun. I cherish reading our article about How to Install a One-Piece Shower Unit.

Apply Now

Report this page